All Products

Adapt your 14mm pegs to 10mm axles. Sold in sets of two.

Steel construction Black

A chain breaker is a must-have for chain installation and service. Compatible with 410 style single speed chains (KMC 410, KMC S1, Cult 410, Rant M...

28" Width, 9" Rise Made of 100% Chromoly

Jibs Dialed Wheel Spacers are available in a variety of sizes to fit a wide range of the most popular pro scooters. They are precision machined fro...

Fine tune your headset stack height with Jibs Headset Spacers. Specs: Fits 1-1/8" threadless headsets Alloy construction Black

Save your bearings with Jibs Heat-Treated Steel Bearing Spacers. Steel spacers are more durable than aluminum Sold in pairs

Replace damaged or stripped ICS bolts with these replacements. Size: M6

These lock washers fit between your axle and your deck/fork. The washer's teeth will prevent the spinning of hardware, making it easier to tighten....

Replace your worn out kingpin nuts with these zinc-coated nuts from Jibs! Zinc-coated 3/8" 24TPI Threads 9/16" hex Sold in packs of (2) two Looki...

Replace your worn or damaged American style loose-ball bearings with this economical bottom bracket. Includes bearings, cups, cones, spindle and ha...

This barrel adjuster is a replacement for most BMX brake calipers. This adjuster typically mounts in your frame. M6 threads Fits most BMX frames

Replacement barrel adjuster for levers with M7 threads.

Jibs Ledgehammer axle bolt replacement kit. Heavy duty application Available in 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, and 110mm Includes bolt...

Upgrade your BMX bike to a 25-9 microdrive with this full kit. Includes 25T Jibs AM Sprocket, Jibs 3-Piece Chromo Crankset with American BB adapter...

Microspacers are the perfect solution to your headset problems! If your dust cap is contacting your head tube, then a microspacer or two between th...

This axle nut fits the Jibs M8 Heavy Duty Axle Kit. Sold in pairs.

Improve your headset performance with the uncompromising quality of the Jibs Precision Headset Spacer. CNC machined from aluminum and finished with...

Primarily for race application Adapts presta valves to schraeder pumps

4" x 2.25" UV coated for fade resistance Extra durable vinyl material

If your headset is feeling crunchy or stiff, it might be time for new bearings. These bearings will fit any Campy spec integrated headset (standard...

Extend the life of your clamp by replacing worn out or stripped hardware with this kit from Sentenced! M6x1.0mm threads Heat-treated steel 5mm he...

This kit is the perfect way to upgrade your loose ball bottom bracket. Adapter cups press into the frame in place of unsealed bearings, and it incl...

This bar saver allows you to use slitted bars with SCS. No cutting required - use your bars at full height! The inside of the bar saver is machined...

25.4mm post diameter Slim padding One-piece design

These washers are installed on either side of your skateboard wheels, and ensure your bearings are properly centred and rolling smoothly. Sold in ...

Adapt your 15/16" sprocket to 19mm or 22mm spindles.

Jibs Sticker Bomb grip tape features standard grit for a consistent feel. Sheets measure in at 7" x 24" for a perfect fit on any scooter deck.

Replace your frayed or broken straddle cable for optimal brake performance. 205mm length

Save your thumbs and use a tire lever when you flat out. Sold as pairs

40mm reach 30mm rise 22.2mm clamp diameter

Balance and stability are key to excelling in any action sport. The Jibs Training Balance Board is designed to help improve your coordination, bala...

Replacement nuts for standard skateboard trucks. Zinc-coated 5/16" 24TPI threads 1/2" hex Sold in packs of (4) four Looking for kingpin nuts? Cli...

These grips are large and in charge! Measuring in at a whopping 215mm length, you'll definitely be able to find your bars after any tuck-no-hander ...

Now available in a 2-pack! This simple and cost effective tool is perfect for maintenance on your scooter or BMX bike. It has 5mm and 6mm heads, su...

BUY ONE, GET ONE 50% OFF! Discount automatically applied in cart! 20" diameter 2.25" width 65psi rated Reflective sidewall strip *Tire only, rim ...

The Master Clamp features a custom bolt design, that fits both a 5mm and 6mm Allen key. This seemingly small feature makes things just a little bit...

KMC's 410 Chain is quite possibly the most popular chain out there. This chain is 1/2" x 1/8" and is available in a ton of colors!

Single speed chain 112 links Quick-link included

This axle pack is suitable for Lucky Crew scooters. May be used as a replacement if your existing hardware is worn out. Also perfect to keep as a ...

This axle pack is suitable for Lucky Evo or Covenant scooters. May be used as a replacement if your existing hardware is worn out. Also perfect to...

This axle pack is suitable for Lucky Prospect scooters. May be used as a replacement if your existing hardware is worn out. Also perfect to keep as...

This brake is crafted from 18 gauge spring steel, and sits at the perfect angle. The anti-vibration pad ensures that your scooter won't rattle. ...

This brake is crafted from 18 gauge spring steel, and sits at the perfect angle. The anti-vibration pad ensures that your scooter won't rattle. ...