Every Item

Balance and stability are key to excelling in any action sport. The Jibs Training Balance Board is designed to help improve your coordination, bala...

Upgrade your BMX bike to a 25-9 microdrive with this full kit. Includes 25T Jibs AM Sprocket, Jibs 3-Piece Chromo Crankset with American BB adapter...

25.4mm diameter 300mm length Compatible with all pivotal seats

Printed Jibs graphic 97/3 polyester/spandex Structured, five-panel, mid-profile, 3 1/2" crown Permacurv® visor S/M (6 3/4"-7 1/4")

Printed Jibs logo 65/35 cotton/polyester Multicam is 60/39/1 cotton/polyester/spandex Structured, five-panel, high-profile, 3 1/2" crown Flat bill...

Printed Jibs logo 65% polyester, 35% cotton 5-panel, structured, mid-profile Eight-row stitching on bill 3 1/2" crown Hard buckram backed front pa...

40mm reach 30mm rise 22.2mm clamp diameter

Replace your worn out kingpin nuts with these zinc-coated nuts from Jibs! Zinc-coated 3/8" 24TPI Threads 9/16" hex Sold in packs of (2) two Looki...

For HIC compression Aluminum construction Fits 34.9mm oversized, slitted bars

Screen printed tee with Jibs 3D Logo graphic. 100% Cotton Looking for youth sizing? Click here.

Screen printed tee with Jibs 3D Logo graphic. 100% Cotton Looking for adult sizing? Click here.

Jibs 5mm Brake Housing Ends are a reliable and durable solution for brake cable housings. Featuring a pre-crimped fit and brass construction, they ...

Improve your headset performance with the uncompromising quality of the Jibs Precision Headset Spacer. CNC machined from aluminum and finished with...

Sealed bearings Mid size Fits 19mm spindle Includes two (2) bearings

Jibs Sticker Bomb grip tape features standard grit for a consistent feel. Sheets measure in at 7" x 24" for a perfect fit on any scooter deck.

Embroidered Jibs™ wordmark logo 80% acrylic, 20% wool 6 panel construction Adjustable snap back

Jibs Dialed Wheel Spacers are available in a variety of sizes to fit a wide range of the most popular pro scooters. They are precision machined fro...

If you've lost or damaged your nuts, there's no need to worry. These replacements fit on all standard 14mm male-axle hubs. Installation is a breeze...

Microspacers are the perfect solution to your headset problems! If your dust cap is contacting your head tube, then a microspacer or two between th...

Looseball front hub, 10mm axle Semi-sealed rear hub, 14mm axle Single wall rims 20x2.3" tires Includes tubes

Fine tune your headset stack height with Jibs Headset Spacers. Specs: Fits 1-1/8" threadless headsets Alloy construction Black

Now available in a 2-pack! This simple and cost effective tool is perfect for maintenance on your scooter or BMX bike. It has 5mm and 6mm heads, su...

Replace your frayed or broken straddle cable for optimal brake performance. 205mm length

This simple and cost effective tool is perfect for maintenance on your scooter or BMX bike. It has 5mm and 6mm heads, suitable for most hardware on...

Dial in your skateboard with a set of Jibs bushings! Available in two hardnesses you can tune the turning performance of your trucks. If you prefer...

A chain breaker is a must-have for chain installation and service. This tool features a sturdy handle, and threaded chain guide to hold the chain i...

If you've lost or damaged your nuts, there's no need to worry. These replacements fit on all standard 14mm male-axle hubs. Installation is a breeze...

Replacement nuts for standard skateboard trucks. Zinc-coated 5/16" 24TPI threads 1/2" hex Sold in packs of (4) four Looking for kingpin nuts? Cli...

These washers are installed on either side of your skateboard wheels, and ensure your bearings are properly centred and rolling smoothly. Sold in ...

Includes four ABEC11 bearings.

Replace your damaged or stripped hardware with these Jibs M8 clamp bolts. M8 thread Sold in pack of four (4)

Replace your worn or stripped clamp bolts! Fits full size SCS clamps that require longer M6 bolts, like Proto clamps. M6 threads Sold in pack of f...