423 Guelph Line, Burlington ON, L7R3L7
423 Guelph Line
Jibs Ledgehammer axle bolt replacement kit.
Heavy duty application
Available in 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, and 110mm
Fits most Envy scooters. If your axle is stripped or broken, this is a direct replacement. If using pegs, try the Sentenced M8 Heavy Duty Axle upgr...
Fine tune your headset stack height with Jibs Headset Spacers.
Fits 1-1/8" theadless headsets
Replacement axle for steel Envy Colt/Envy One forks. Will not work on aluminum forks.
Includes all required hardware for HIC compression. Use with HIC/SCS compatible forks, and oversize steel bars with an oversized double clamp.
Replacement spacers for Envy decks and completes. Fits decks produced in 2018 or later.
Sold in pairs
Pair of replacement clamp bolts.
M8 x 20mm
Complete IHC compression set for Envy forks.
These inserts give your Envy deck the squared/boxed shape you've always wanted! They make grinds easier and more consistent, and generally do a muc...
Fits most Envy scooters. Perfect for if your brake hardware is stripped or damaged.
This axle is a direct replacement for Ethic Erawan, Lindworm and Pandemonium decks.
Pair of replacement clamp bolts.
M8 x 25mm
If your fork is already internally threaded for a compression bolt, then this is the perfect HIC kit for your setup.
This kit includes 4 spacers to convert your Envy scooter to 30mm wide wheels. Includes two fork spacers, and two deck spacers (rubbers not included...
This clamp shim allows you to use your oversized clamp with standard bars. Just slide the shim over your bar, and slide the clamp over the shim. Al...
This axle pack is suitable for Lucky Crew scooters. May be used as a replacement if your existing hardware is worn out. Also perfect to keep as a ...
If you want to run oversized steel or titanium bars on your Root Industries IHC fork, you have two options: replace your fork with a HIC/SCS compat...
This bar saver allows you to use slitted standard bars with SCS. No cutting required - use your bars at full height! The inside of the bar saver is...
Extend the life of your clamp by replacing worn out or stripped hardware with this kit from Sentenced!
This kit includes 4 spacers to convert your Envy scooter to 24mm wide wheels. Includes two fork spacers, and two deck spacers (rubbers not included...
This axle pack is suitable for Lucky Evo or Covenant scooters. May be used as a replacement if your existing hardware is worn out. Also perfect to...
Adapt Madd Gear wheels to standard scooter decks.
Jibs Dialed Wheel Spacers are available in a variety of sizes to fit a wide range of the most popular pro scooters. They are precision machined fro...
This aluminum shim is tougher than plastic shims. Fits on 34.9mm oversized bars only. Includes shim, top cap, and bolt.
Replacement IHC shim for Madd Gear VX4 Pro and Team models. May fit other scooters.
This star nut is a perfect replacement if you're running HIC, SCS, or ICS, and you don't already have a star nut installed in your bars or fork.
These are standard spacers to fit Madd Gear wheels to Madd Gear decks. These spacers will not work with other brands of wheel or deck.
Sold in pairs
Direct replacement shim for most Madd Gear forks. Fits oversize bars.
These spacers go between the wheel and deck of your Grit scooter.
Colour corresponds with spacer width!
This kit allows you to use oversized steel or titanium handlebars on any Envy IHC fork. It includes a lightweight machined aluminum adapter shim, a...
This axle pack is suitable for Lucky Prospect scooters. May be used as a replacement if your existing hardware is worn out. Also perfect to keep as...
Replacement spacers for the Ethic Erawan deck.
If you've lost or damaged that spacers on your Ethic Pandemonium deck, these replacement will get your scooter back up and running again.
ICS10 is a similar, but improved system based on original ICS compression. The star nut is installed into the handlebar, and the bolt slides throug...
Replacement spacers for Root Industries decks. Compatible with all 24mm wide scooter wheels.
This kit includes 4 spacers to convert your Envy scooter to 28mm wide wheels. Includes two fork spacers, and two deck spacers (rubbers not included...
This M8 compression kit includes an SCS washer with hollow M8 bolt. The washer is tapered to maximize bar overlap, creating a stronger interface....
Replacement IHC kit for Root Industries IHC forks.
Includes: shim, top cap, compression ring, bolt
This axle nut fits the Jibs M8 Heavy Duty Axle Kit. Sold in pairs.
Replacement compression cap for Ethic Merrow forks.
Compatible with HIC forks
Compatible with slitted oversized steel/titanium bars
Compatible with Mini-HIC, or IHC forks and standard sized bars.
Includes shim, bolt, cap, and star nut
Works with standard (31.8mm) bars
Replace damaged or stripped ICS bolts with these replacements.
Replacement IHC top cap for UrbanArtt forks.Aluminum construction
Black anodized finish
Replacement rear axle for Madd Gear complete scooters.
Madd Gear MGX P1 Pro
Madd Gear MGX T1 Team
Madd Gear MGX E1 Extreme
Replacement spacers for Root Industries decks. Compatible with all 30mm wide scooter wheels.
ICS Scooter Compression bolt.
Durable ICS bolt for Scooter compression system.
Replacement IHC shim for Madd Gear VX5 Team, Nitro and Extreme models.