Jibs

Replace your frayed or broken straddle cable for optimal brake performance. 205mm length

Now available in a 2-pack! This simple and cost effective tool is perfect for maintenance on your scooter or BMX bike. It has 5mm and 6mm heads, su...

Jibs Ledgehammer axle bolt replacement kit. Heavy duty application Available in 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, and 110mm Includes bolt...

If your headset is feeling crunchy or stiff, it might be time for new bearings. These bearings will fit any Campy spec integrated headset (standard...

Fine tune your headset stack height with Jibs Headset Spacers. Specs: Fits 1-1/8" threadless headsets Alloy construction Black

Save your bearings with Jibs Heat-Treated Steel Bearing Spacers. Steel spacers are more durable than aluminum Sold in pairs

Jibs Dialed Wheel Spacers are available in a variety of sizes to fit a wide range of the most popular pro scooters. They are precision machined fro...

Steel construction Black

Replace damaged or stripped ICS bolts with these replacements. Size: M6

These lock washers fit between your axle and your deck/fork. The washer's teeth will prevent the spinning of hardware, making it easier to tighten....

Replacement barrel adjuster for levers with M7 threads.

Microspacers are the perfect solution to your headset problems! If your dust cap is contacting your head tube, then a microspacer or two between th...

This axle nut fits the Jibs M8 Heavy Duty Axle Kit. Sold in pairs.

Primarily for race application Adapts presta valves to schraeder pumps

Extend the life of your clamp by replacing worn out or stripped hardware with this kit from Sentenced! M6x1.0mm threads Heat-treated steel 5mm he...

Adapt your 15/16" sprocket to 19mm or 22mm spindles.

Save your thumbs and use a tire lever when you flat out. Sold as pairs

25.4mm post diameter Slim padding One-piece design

Jibs Sticker Bomb grip tape features standard grit for a consistent feel. Sheets measure in at 7" x 24" for a perfect fit on any scooter deck.

Sealed bearings Mid size Fits 19mm spindle Includes two (2) bearings

Improve your headset performance with the uncompromising quality of the Jibs Precision Headset Spacer. CNC machined from aluminum and finished with...

Jibs 5mm Brake Housing Ends are a reliable and durable solution for brake cable housings. Featuring a pre-crimped fit and brass construction, they ...

Screen printed tee with Jibs 3D Logo graphic. 100% Cotton Looking for youth sizing? Click here.

Screen printed tee with Jibs 3D Logo graphic. 100% Cotton Looking for adult sizing? Click here.

Replacement nuts for standard skateboard trucks. Zinc-coated 5/16" 24TPI threads 1/2" hex Sold in packs of (4) four Looking for kingpin nuts? Cli...

Replace your worn out kingpin nuts with these zinc-coated nuts from Jibs! Zinc-coated 3/8" 24TPI Threads 9/16" hex Sold in packs of (2) two Looki...

This sprocket is a suitable replacement for most entry level BMX bikes. 25T Steel construction 15/16" bore

170mm 3-piece chromo cranks with bottom bracket included. 170mm Crank Arm Length Chromoly Construction 3 Piece Design Mid-Bottom Bracket Included

Printed Jibs graphic 97/3 polyester/spandex Structured, five-panel, mid-profile, 3 1/2" crown Permacurv® visor S/M (6 3/4"-7 1/4")

Printed Jibs logo 65% polyester, 35% cotton 5-panel, structured, mid-profile Eight-row stitching on bill 3 1/2" crown Hard buckram backed front pa...

Printed Jibs logo 65/35 cotton/polyester Multicam is 60/39/1 cotton/polyester/spandex Structured, five-panel, high-profile, 3 1/2" crown Flat bill...

25.4mm diameter 300mm length Compatible with all pivotal seats

This barrel adjuster is a replacement for most BMX brake calipers. This adjuster typically mounts in your frame. M6 threads Fits most BMX frames

Replace your worn or damaged American style loose-ball bearings with this economical bottom bracket. Includes bearings, cups, cones, spindle and ha...

Looseball front hub, 10mm axle Semi-sealed rear hub, 14mm axle Single wall rims 20x2.3" tires Includes tubes

Upgrade your BMX bike to a 25-9 microdrive with this full kit. Includes 25T Jibs AM Sprocket, Jibs 3-Piece Chromo Crankset with American BB adapter...

Balance and stability are key to excelling in any action sport. The Jibs Training Balance Board is designed to help improve your coordination, bala...

These washers are installed on either side of your skateboard wheels, and ensure your bearings are properly centred and rolling smoothly. Sold in ...

This bar saver allows you to use slitted bars with SCS. No cutting required - use your bars at full height! The inside of the bar saver is machined...